ATFC106D digital TEC controller assembly is the updated version of the old ATFC105D, which has stopped production now. As shown in the photo below, there is a LED display and a panel for operation. In this panel, you can set different parameters and monitor different status by the LED indication.(more)

This noise measurement amplifier, ATNMA2, is designed for testing ultra low noises such as nanovolt or microvolt noises that cannot be detected by oscilloscopes. When it detects the noise signals, the noise measurement amplifier amplifies the noise to magnifications, 3,000×, 10,000×, 30,000×, 100,000×, 300,000×, 1,000,000×, 3,000,000×, according to different requirements. There are three noise measurement bandwidths: 0.1Hz ~ 10Hz, 0.1Hz ~ 1kHz, 0.1Hz ~ 100kHz.(more)

LDA1-CP1-D is a dual mode laser diode driver that is designed for driving P type diode lasers. This laser driver comes with well controlled and monitored driving current and output laser power. Two versions of laser drivers are available, LDA1-CP1-D-SNI and the LDA1-CP1-D-SNO, the former refers that external signal synchronizes the signal of the chip, while the latter is that external signal synchronizes the signal of the chip.(more)

AAS16A9.5V AC input laser diode driver is newly developed by Analog Technologies, Inc. This laser driver comes with a compact size and high efficiency, more than 70%. It can be used to driver high current laser diode with high stability.(more)

LDA1-CP2 is similar with LDA1-CP1, the former is designed for driving N type diode lasers and the latter is for driving P type diode lasers. We are focusing on the first LDA1-CP2 laser driver.(more)

There are various types of laser diode drivers in the market, and most of them have a large size. There is an urgent demand for small size laser diode drivers, thus ATI develops some new laser diode drivers including DC input and AC input ones, both of which have a small size, and the former is smaller than the latter. AAS40A4V2 is one of AC input laser diode drivers.(more)

CWD-01-V2-D is one of constant current laser diode drivers in ATI. This laser driver is designed for driving diode lasers with high efficiency and constant output current of maximum 2A.(more)

ATI develops and manufactures various types of Peltier controllers, or so-called TEC controllers, which are designed and used for driving thermoelectric coolers, or TECs. This TEC controller comes with high stability, high energy efficiency, zero EMIs and compact size. This controller is packaged in a 6-side metal enclosure which blocks EMIs from outside.(more)

ATE1-TC-70-15AS is a thermal cycling thermoelectric module, which are designed for thermal cycling applications. Standard TEC modules will suffer operation life decrease when the TECs shift from heating to cooling or cooling to heating. Thermal cycling TEC modules, such as ATE1-TC-70-15AS, can bear the heat changes and the operational life will not be reduced.(more)

Laser diode driver are designed for driving various types of laser diodes. For years, ATI has been dedicated to developing and manufacturing multiple types of laser diode drivers. ATLS100MA104 laser diode driver is a newly developed laser driver.(more)