The ATLSxA212D series laser drivers have low output noise, compact size, current-limiting protection. There are 5 models in this series of laser drivers. The “xA” in the part number represents the maximum output current of the laser driver module, which can be: 50mA, 500mA, 1A, 2A and 3A respectively. The laser drivers have a wide range of input voltage from 4.5V - 16V. There is no need for heat sink with high efficiency. Two kinds of packaging are available: DIP and SMT.(more)

Ntc thermistor is widely used in many industries for precision temperature sensing and detection applications. This ntc thermistor assembly ATH10KHN10 comes with a miniature size and high stability in temperature sensing.(more)

TEC controller can be also called Peltier controller, which is designed for driving and controlling TEC modules (Peltier modules). This TEC controller, TECA1-xV-xV-DAH, is a newly developed Peltier controller with higher precision than standard TEC controller. Besides, the controller also comes with high stability, compact size, and high reliability.(more)

Peltier modules are also called TEC module, which is used to cool down or heat up an object in a temperature regulation system. Peltier modules can’t work independently, and often work with a Peltier controller. This Peltier controller, TEC28V15A, can drive and control the operation of Peltier modules with an input DC voltage of 9V to 28V and an output current up to 15A.(more)

SK200 is a newly developed kits enclosure by Analog Technologies, Inc. This enclosure is an updated version of our existed popular product, SK128B. As indicated in the part number, SK200, this enclosure has 200 compartments with individual lid.(more)

AAS12A12V2 laser driver is designed for driving diode lasers. It is powered by an AC voltage between 100V to 240V and the output current can go up to 12A.(more)

ATLS250MA103 laser diode driver is used for driving laser diodes with low noise and constant current. This laser driver has an output current of 250mA, as indicated in the part number. The noise is 2.5µA at the frequency of 0.1Hz to 10Hz.(more)

Inverse piezoelectric effect refers to that when an electric field is applied in the polarization direction of piezoelectric sensing elements, these piezoelectric sensing elements will produce mechanical deformation or mechanical pressure in a certain direction. When the applied electric field is removed, this deformation or pressure will disappear as well.(more)

ATLS250MA106 is a constant current laser diode driver with 250mA low noise current. The noise is very low, 2μVP-P at the frequency of 0.1Hz to 10Hz. There is no need for heat sinks.(more)

TEC controllers are designed for driving TEC modules in a temperature control system. In order for easy evaluation on TEC controllers, evaluation board TECEV104 is developed. This evaluation board can be used with all the TECA1 series TEC controllers in ATI, such as TECA1-5V-2.5V-D, TECA1-3V-3V-D, TECA1-3V-2.5V-D, etc.(more)