Traditional ntc thermistors are epoxy encapsulated or glass encapsulated. The latter one is better than the former one in performance. However, in many applications of ntc thermistors, it is not easy to mount the thermistors. Therefore, ATI provides a simple resolution for this: mount a metal ring lug outside the glass encapsulated ntc thermistor, which simplified the mounting process of the ntc thermistors.(more)

Laser diode driver is usually used to drive laser diode. ATLS10A216 is a high voltage and constant current laser driver. This laser driver features compact size, fully shielded, low output current noise, wide input and output voltage range, high efficiency, etc.(more)

ATH10KBL2A is a high performance NTC thermsitor series, with glass encapsulated thermistor head and a ring lug outside it. The ring lug is used to mount to other objects easily and the glass encapsulated thermistor head ensures high stability and liability.(more)

ATLS250MA103 is a laser driver in 103 series, with a maximum current up to 250mA. This laser driver features low noise, 2.5µAP-P at the frequency of 0.1Hz to 10Hz. This laser diode driver doesn't need heat sinks since it generates very small amount of heat, less than 1W. The absolute accuracy of this laser driver is high, <0.1%. It also comes with high stability, <100ppm/°C. The laser controller has a over temperature protection circuit, which can prevent the laser driver from being overheat when the temperature of the controller exceeds 120°C.(more)

AHV12V2KV1MAW is a newly developed high voltage power supply, which is used to converse low voltage to high voltage. This high voltage power supply can be applied to many fields, such as electron beam welding, CRT monitor test, particle accelerator, nanotechnology application, etc.(more)

High voltage power supply is designed and used to achieve DC DC conversion from low voltage to high voltage. AHV12V3KV1MAW is a typical high voltage power supply. As shown in the part number, AHV12V3KV1MAW, "A" stands for the company name, Analog Technologies, Inc; "HV" is for high voltage; "12V" is the typical input voltage, and "3KV" is the maximum output voltage, 3000V. "1MA" means the maximum output current, and "W" refers to the connection type, wire.(more)

Evaluation board of laser driver is designed and used to evaluate laser driver conveniently and safely. The laser is usually expensive and vulnerable, thus it's necessary to use a dummy laser to emulate real laser. ATLS1A103DEV1.0 is such an evaluation board to evaluate popular laser driver series, ATLSXA103 series laser drivers, including ATLS100MA103D, ATLS200MA103D, ATLS250MA103D, ATLS500MA103D, and ATLS1A103D laser drivers of DIP package.(more)

TEC modules are widely used in many applications for heating up or cooling down target objects. TEC controller is a electronic module that is used to control TEC module with high stability and high energy efficiency.(more)

ATLS500MA103 is a laser diode driver with a maximum current up to 500mA. This laser driver comes with low noise, 5µAP-P at 0.1Hz to 10Hz. The power supply voltage is 5V, and the output voltage range is from 1.5V to 4V. Since the heat generated by this laser driver is <1W, so there is no need to provide a heat sink for this laser driver.(more)

Laser diode is widely used in many fields nowadays, so there is an urgent need for laser diode driver with high efficiency, high stability and low noise. ATI provides various types of laser diode drivers with different currents and noise values, and ATLS1A103 is one of the most popular laser drivers among them.(more)