An ntc thermistor should come with short term and long term drifts in the resistance & temperature relationship. A number of high stability low drift NTC thermistors are provided in Analog Technologies. ATH10KL2A is a typical ntc capped thermistor.
The ATH10KL2A is a capped ntc thermistor with a thermistor head packaged in a small ring lug. This thermistor head is the same as ATH10KR8, so the characteristics of both of ntc thermistors are similar. ATH10KR8 is a glass encapsulated ntc thermistor.(more)
TEC5V6A-D is a Peltier controllerwithhigh stability and high precision, which is utilized to drive thermal electric coolers (TECs). As shown in Figure 1, the Peltier controller is packaged in a metal enclosure so that it can block the incoming and outgoing interferences between the controller and other electronics. And the peltier controller has a compact size, which is easyfor using, carrying and storing.(more)
The ATH10KR8B is a series of high precision glass encapsulated ntc thermistor. The ATH10KR8B series ntc thermistor come with three versions, ATH10KR8B, ATH10KR8BT65 and ATH10KR8BT65S. The ATH10KR8B has two bear leads coated with copper; the ATH10KR8BT65S has the two leads covered with high temperature plastic tubing and sealed by epoxy, while the ATH10KR8BT65 is the non-sealed version with plastic tubing. They can work under up to 140°C temperature and the latter is of liquid resistant.(more)
ATLSXA212 is a laser driver with high voltage and constant current. It is designed to drive one or multiple laser diodes for DPSSL, EDFA, and fiber lasers with low noise and high efficiency. And in order to meet more applications, our company (ATI) has developed and released ATLSXA212 series laser drivers: ATLS500mA212D, ATLS1A212D, ATLS2A212D, and ATLS3A212D. Figure 1 is the photo of a typical one, ATLS1A212D laser driver.(more)
ATE1-71 series TEC modules are applied to regulate the temperature of the target object and widely used in solid state laser, icebox, air condition, IC’s, optical components, CPU’s, CCD cameras, etc. This series of tec modules come with high changing speed and stabilize the temperature to a wide range with high precision.(more)
ATE1-TC-31-3AS thermal cycling TEC module is newly developed by our company, which is the updated and improved versions of the normal TEC modules. These TEC modules can bear thermal cycling applications, thus the service life is longer than normal TEC modules.(more)
The ATH100KL2B is a similar capped ntc thermistor assembly to with ATH100KL2C. Both of them has a thermistor head of ATH100K1R25, which is a glass encapsulated thermistor. Outside this thermistor head, there is a ring lug. The ATH100KL2B series thermistor also has three versions, ATH100KL2B, ATH100KL2BT70 and ATH100KL2BT70S. The ATH100KL2B has two bear leads coated with copper; the ATH100KL2BT70S has the two leads covered by high temperature plastic tubing and sealed by epoxy, while the ATH100KL2BT70 is the non-sealed, but with high temperature plastic tubing.(more)
TECs stand for thermal electric coolers, which have been widely used to cool and heat the objects in many fields, such as instrumentation, PCR equipment, thermal cycling system, cooling device and analysis equipment. As TECs have no moving parts, no noise, environment friendly and long service life, it has been more and more popular in electronic fields.(more)
ATI provides a variety of basic NTC thermistor, such as ATH10KR8, ATH10K1R0, or ATH10K1R25. These NTC thermistors come with high stability and accuracy, which can be used for optical components, industrial fields that high precision temperature measurement and control is needed.(more)
