ATLS500MA103 is a laser diode driver with a maximum current up to 500mA. This laser driver comes with low noise, 5µAP-P at 0.1Hz to 10Hz. The power supply voltage is 5V, and the output voltage range is from 1.5V to 4V. Since the heat generated by this laser driver is <1W, so there is no need to provide a heat sink for this laser driver.(more)

Laser diode is widely used in many fields nowadays, so there is an urgent need for laser diode driver with high efficiency, high stability and low noise. ATI provides various types of laser diode drivers with different currents and noise values, and ATLS1A103 is one of the most popular laser drivers among them.(more)

TEC module is also called thermoelectric cooler that is used to cool down or heat up objects. Long life TEC modules refer to those TECs that can be used in thermal cycling application, such as PCR devices, thermal cyclers, chillers and analyzers, thus they are also called thermal cycling TEC modules.(more)

Long life TEC modules refer to those that are designed for thermal cycling applications, i.e. frequent changes between heating up and cooling down. It is not practical for standard TEC modules since the life time will be largely reduced. This long life TEC module has much longer operational life than standard TEC in terms of thermal cycling application, thus it can be also called thermal cycling TEC module.(more)

ATH10KL2C ntc thermistor assembly is similar to ATH10KL2B. The difference between them lies in the size of the ring lug outside the thermistor head. The thermistor head inside the ring lug is the same, a glass encapsulated ntc thermistor. The inner diameter of the ring lug in ATH10KL2C is larger than that in ATH10KL2B, which means a larger hole.(more)

ATLS4A214 is a high voltage constant current laser diode driver, which comes with a wide input voltage range, from 5V to 14V. This laser diode driver has a high efficiency, over 90%, so there is no need for heat sinks.(more)

ATH100K1R25 is a glass encapsulated ntc thermistor with two copper coated lead wires. This ntc thermistor has higher stability and precision than general epoxy encapsulated thermistor. The thermistor can be used to sense the temperature for those applications, where require high temperature sensitivity, long term stability, and high sensing temperature, such as optical components, laser drivers, industrial process control, etc..(more)

ATLS6A214 laser driver comes with high voltage, constant current, and high efficiency. The efficiency can reach over 90%, so there is no need for heat sink. It also has a compact size, 27.4*21*5.7mm, which saves valuable PCB space in laser applications.(more)

ATLS6A214 laser driver comes with high voltage, constant current, and high efficiency. The efficiency can reach over 90%, so there is no need for heat sink. It also has a compact size, 27.4*21*5.7mm, which saves valuable PCB space in laser applications.(more)

With 161 pairs of Peltier elements, ATE1-161 series thermoelectric coolers come with a maximum input voltage of 19.3V. This TEC modules is aimed to regulate and stabilize the temperature in a wide range, and it can be used in air conditioner, IC, solid state laser, icebox, etc.(more)