Laser diode driver 214 series includes ATLS6A214 and ATLS4A214. The maximum output current is 6A, and 4A respectively. ATLS4A214D has a compact size and a six sided metal enclosure that is used to prevent EMI from other electronics.(more)

ATTP1A is designed for evaluating TEC controllers easily. It’s easy to adjust the temperature range according to the customer requirement, so that the TEC controller can detect the pre-set temperature range. It provides a platform with wide temperature regulation range from -20°C to 110°C. The cold plate ATTP1A will be used together with TEC Controller TEC5V6A and TEC Controller Evaluation Board. The cold plate ATTP1A will connect with TEC controller by wire connector. It includes TEC module, thermistor and fan and heat sink on the right side of ATTP1A. Temperature range can be achieved through adjusting TEC temperature control parameters R1 (W11, W12, R1A), R2 (W21, W22, R2A), R3 (W31, W32, R3A) on the left side of the plate. There are three switches S1, S2 and S3 at the bottom right side of the plate. The switches will be turned off when adjusting the TEC temperature control parameters. When R1, R2 and R3 are all adjusted to the required resistance, turn on all switches.(more)

The TEC Controller TEC5V6A is designed for driving TECs (Thermo-Electric Coolers). It can be highly stable to adjust the object temperature. It has a very small package with a 6 sided metal enclosure to prevent the controller and other electronics from interfering with each other. There are three models: TEC5V6A-D, TEC5V6A-S, TEC5V6A-DA.(more)

We have a series of laser drivers that meet different design requirements: Ultra low noise laser drivers, high efficiency laser drivers, and dual channel mode laser drivers. The current of ultra low noise laser drivers is relatively small, and come with 100mA, 200mA, 250mA, 500mA, 1A and other current to choose from. The high efficiency laser drivers come with up to 6A current and 10A current under developement. The dual channel mode can drive N-channel or P- channel diode lasers respectively.(more)

AHVAC25KVR5MABT high voltage power supply is newly developed bench top product. This high voltage power supply comes with a digital display for showing output voltage. It is designed for achieving AC-DC conversion from AC voltage, 90V ~ 230V, to high DC voltage, 25KV. It can be widely applied in many industrial fields such as measurement and control, medical care field, test and laboratory equipment, etc.(more)

In order to meet different needs of customers, we designed a series of high voltage constant current caser driver, ATLSxA212. They have different current values: ATLS500MA212, ATLS1A212, ATLS2A212, and ATLS3A212. They have a wide range of input voltage from 4.5V - 16V. There is no need for heat sink with high efficiency. Two kinds of packaging are available: DIP and SMT.(more)

Recently, we designed a high voltage 4A Laser driver, ATLS4A217. It has both a wide input voltage range from 5.5V to 27V and a wide output voltage range from 0.1VVPS to 0.8VVPS. At the same time, it allows driving one or more laser diodes and its current can be as high as 4A. There is no need for heat sink with high efficiency. It’s very difficult to meet the above characteristics for laser driver at the same time.(more)

ATI is dedicated to developing and manufacturing most advanced laser diode drivers. ATLS200MA103 is one of 103 series laser drives, which feature ultra-low noise, constant current, high stability, and compact size. This laser driver comes with an output current of 200mA and an output voltage from 1.5V to 4V when powered by a 5V power supply.(more)

Recently ATI has successfully developed and produced a series of high voltage constant current laser drives, ATLSXA214. The maximum output current can be up to 4A and 6A. The power supply voltage range of this series laser drives is from 5V to 14V. What’s more, ATI laser drivers are characterized with high efficiency of over 90%. There are three control states for 214 series high voltage laser controllers, including shutdown, standby and operation. In terms of packages, both DIP and SMT packages are available to choose. To offer customers more conveniences while using, all laser controllers are with compact sizes. Please refer to the following physical photos of 214 series laser drivers.(more)

Super SMT resistor kit is one of our popular and well-known kits products in the world. Nowadays, we have developed a new resistor kit with more resistors and more values, based on our new SMT component kit SK200. As indicated in the part number, SK200 has 200 independent cells for enclosing SMT resistors.(more)